Searching the boundaries of recorded date, Ccd-trv81 only, To search for the beginning of a specific date – Sony CCD-TRV41 User Manual
Page 49: To scan the beginning of all days, Date (ccd-trv81 only), T_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching the boundaries of recorded date
- CCD-TRV81 only
You can search for the boundary between recording dates using the Data Code
automatically recorded on the tape.
There are two modes:
• Searching for the beginning of a specific date, and playing back from there
(Date
Search)
• Searching for the beginning of all days, one after another, playing back about 10
seconds of each
(Date Scan)
[a]
■i)
[b]
0
[c]
Each time you press DATE, themaode changes as follows:
Date Search —► Date Scan —► nothing
t_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ I
To search for the beginning of a specific date
(1) Set the POWER switch to VTR.
(
2
)
Press DATE on the Remote Commander.
(3) When the current position is [b], press to search towards
[a]
or press I
to search towards
[c].
To scan the beginning of all days
(1) Set the POWER switch to VTR.
(
2
)
Press DATE on the Remote Commander twice.
(3) Press ◄◄ or Date Scan starts.