Chicago Electric 42933 - Manual (Page 5)

SKU 42933 For technical questions, please call 1-800-444-3353. Page 5
NEVER LEAVE TOOL RUNNING 21.
UNATTENDED. TURN POWER OFF.
Don’t leave tool until it comes to a
complete stop.
gROunDIng InStRuctIOnS
tO pReVent
eLectRIc SHOck
AnD DeAtH FROM
IncORRect gROunDIng
WIRe cOnnectIOn
ReAD AnD FOLLOW tHeSe
InStRuctIOnS:
110-120 V~ grounded tools: tools
with three prong plugs
In the event of a malfunction or 1.
breakdown, grounding provides a
path of least resistance for electric
current to reduce the risk of electric
shock. This tool is equipped with an
electric cord having an equipment-
grounding conductor and a ground-
ing plug. The plug must be plugged
into a matching outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
Do not modify the plug provided – if it
2.
will not fit the outlet, have the proper
outlet installed by a qualified electri-
cian.
Improper connection of the equip-
3.
ment-grounding conductor can re-
sult in a risk of electric shock. The
conductor with insulation having an
outer surface that is green with or
without yellow stripes is the equip-
ment-grounding conductor. If repair
or replacement of the electric cord or
plug is necessary, do not connect the
equipment-grounding conductor to a
live terminal.
Check with a qualified electrician or 4.
service personnel if the grounding
instructions are not completely under-
stood, or if in doubt as to whether the
tool is properly grounded.
Use only 3-wire extension cords that
5.
have 3-prong grounding plugs and
3-pole receptacles that accept the
tool’s plug.
Repair or replace damaged or worn
6.
cord immediately.
125 V~ 3-prong plug and Outlet
(for up to 125 V~ and up to 15 A)
grounding
pin
This tool is intended for use on a cir- 7.
cuit that has an outlet that looks like
the one illustrated above in 125 V~
3-prong plug and Outlet. The tool
has a grounding plug that looks like
the plug illustrated above in 125 V~
3-prong plug and Outlet.
The outlet must be properly installed
8.
and grounded in accordance with all
codes and ordinances.
Do not use an adapter to connect this
9.
tool to a different outlet.
Radial Arm Saw Safety Warnings
For Your Own Safety Read Instruction
Manual Before Operating Saw
DAngeR! coasting cutting tool 1.
can Be Dangerous – Apply brake
immediately to stop cutting tool
when the switch is turned off.