Step 2: setting the time – Sony CMT-ED1 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
step 2: Setting the
time
You must set the time before using the timer
functions.
The clock of the display begins flashes.
When "DAILY" or "TIMER REC"
appears, press KM/WXI repeatedly so
that it disappears.
► TO
2
Press ENTER.
The hour indication flashes.
4
Press ENTER.
The minute indication flashes.
5
Press IKK1/I>C>I1 to set the minutes.
!•
6
Press ENTER.
The clock starts working.
Tip
If you make a mistake, start over from step 1.
3
■ Press IKK1/[>1>I1 to set the hour.
The clock uses the 12 -hour system.
-------
" .1
_____
Advertising