Sony STR-D711 - Manual (Page 13)

Labeling the Program Source
You can input program sources under index names you
create (up to 11 characters); for example, PHONO. TUNER,
CD etc.
Select the program source.
2
Press CURSOR MODE to select the INDEX
mode.
CURSOR MODE
The INDEX indicator iights up.
Create an Index name.
b
To select a letter (A to Z) or number (1 to 9), press
Aor V.
To change the position, press < or >.
Repeat steps 1 to 3 for all other program
sources you want to assign an index name to.
If you input an already store source under any other
Index name
Only the last selected index name will be valid. Each
program source can be stored under only one index name.
To switch the display mode between the original
function name display and created index name display
Each time the DISPLAY is pressed, the selected function
name (which corresponds to the function seiector) and the
created index name are aiternately displayed.
To Turn Off the Power at the Desired Time
(The Sleep Timer Function)
This function can be operated only with the remote
commander.
This receiver has the sleep timer function. With this
function, you can turn off the power automaticaiiy at the
desired time by designating the turn-off time.
Press SLEEP on the remote commander when the power is
on. Each time SLEEP is pressed, the designating time is
displayed in the following order: 2 hours -♦ 1 hour and 30
minutes -► 1 hour -♦ 30 minutes -► SLEEP OFF.
To change the turn-off time
1 Press SLEEP and the remaining time is displayed.
2 Press A or V to change the sleep time. The sleep time is
changed by 1 minute. It can be changed up to 5 hours.
To check the remaining time of the sleep timer
Press SLEEP. The remaining time is dispiayed.
1G