With the str-0911, Select the playback vcr with edit video, Set the playback vcr to the playback mode – Sony STR-D711 User Manual
Page 22: Press edit audio, Editing a video source
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing a Video Source
Adding New Sound on a Video Tape during Video
Editing
During video tape editing, you can add the desired sound
on the recording VCR from various audio program sources.
With the STR-0911
^ Videosignals
Audio signals
VCR 1 I
6
to VIDEO 1
VIDEO OUT/
AUDIO OUT
1
Select the playback VCR with EDIT VIDEO.
To select VCR 2, press EDIT VIDEO so that '2> 1'
appears on the display.
To select VCR 3. press EDIT VIDEO so that *3> 1"
appears on the display.
Set the playback VCR to the playback mode.
3
At the point where audio dubbing starts, press
the pause button on the playback VCR.
Press EDIT AUDIO.
AUDIO appears on the display.
Select the audio program source with the
function selectors.
G Set VCR 1 in the recording mode and then
release the pause mode of VCR 2.
Start playback of the selected audio program
source.
Video dubbing starts and the audio program
source is also recorded
on
the VCR 1
simultaneously.
22