Sony MDS-M100 - Manual (Page 25)

Creating Your Own
Program
(Program Play)
You can pick out the tracks that you like and specify the
playback order in a program containing up to 25 tracks.
LEVEL/DISPLAY/CHAR MENU/NO
YES
■ CLEAR
• PLAY MODE
' Number
buttons
Programming the tracks
1 while the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
2 Turn AMS (or press repeatedly) until
"Program ?" appears, then press AMS or YES.
3 Turn AMS until the track number you want to add
to the program appears, then press AMS or ►► (or
use the number button(s) to enter the track
directly).
If you entered the wrong track number
Press / ►► repeatedly until the wrong track
number flashes, fhen do step 3 above again.
To enter a track number over 10 ^
Use >10. For details, see page 22.
To check the total playing time of the program
Press LEVEL/DISPLAY/CHAR (or DISPLAY).
4 Repeat step 3 to enter other tracks.
5 Press YES.
"Complete!!" appears and the program is completed.
6 Press PLAY MODE repeatedly until "PROGRAM"
lights up in the display.
7 Press l>.
Program Play starts.
To stop Program Play
Press ■.
To resume normal play
Press PLAY MODE repeatedly until "PROGRAM" turns
off.
i The program remains even after Program Play ends or is
stopped
Press to play the program again.
Notes
• If you eject the MD or disconnect the AC power cord, the
program will be lost.
• The display shows "--- m - - s" when the total playing time of
the program exceeds 199 minutes.
• "ProgramFull!" appears when you program 25th track.
Checking the contents of the program
While the deck is stopped and "PROGRAM" lights up,
press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly.
The first several tracks in the program appear in the
display. To see the rest of the program, turn AMS (or
press
repeatedly).
5'
(fi
S
u
25