Sony MDS-M100 - Manual (Page 29)

About indication which appears while
editing
when "Protected" appears in the display
The record-protect slot is open. To edit the MD, slide the
tab to close the slot. For details, see "To prevent
accidental erasure of the recorded material" on page 15.
About indications which appear after
editing
When "TOC" lights up in the display
Editing has finished but the TOC (Table of Contents) on
the MD has not been updated to reflect the editing results.
The editing will be lost if you disconnect the AC power
cord while the indication is on. The TOC will be updated
only when you eject the MD or turn off the MD deck.
When "TOC Writing" flashes in the display
The deck is updating the TOC. Do not disconnect the AC
power cord or move the deck while the indication flashes.
Erasing Tracks
You can erase a track or part of a track simply by
specifying the number of the track or the portion within a
track to be erased. You can also erase all the tracks on an
MD at one time.
Erasing a track
Specify the number of the track you want to erase.
Example: Erasing the second track
QJAAA GSi! g ODD
1I]AAA [Ï1CCC
IDDD
When you erase a track, all the tracks after the one erased
are automatically renumbered. For example, if you erase
track number 2, the previous track number 3 becomes
track number 2 and the previous track number 4 becomes
track number 3, and so on.
1 While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display.
2 Turn AMS (or press repeatedly) until "Tr
Erase ?" appears, then press AMS or YES.
The deck starts to play the track indicated by the
number in the display.
3 Turn AMS (or press repeatedly) until the
track number you want to erase appears.
4 Press AMS or YES.
"Complete!!" appears for a few seconds and the track
is erased. The track following the erased track starts
to play. If the erased track is the last one on the MD,
the track preceding the erased track starts to play.
To cancel the operation
Press MENU/NO or ■. '
Ç if "Erase ???" appears in step 4 above
The track has been record-protected on another MD deck. If you
still want to erase the track, press AMS or YES again while the
indication appears.
Ç To avoid confusion when erasing more than one track
Start erasing from the highest numbered track. This way you'll
avoid renumbering the tracks that you plan to erase.
? You can undo the erasure
For details, see "Undoing the Last Edit" on page 36.
m
a
3
X
(b
a
<b
a
S
D
29