Hooking up the audio components, Connecting the ac power cord – Sony MDS-M100 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Hooking Up the Audio Components
o
A
5
5‘
(0
V)
fi)
(fi
a
Setting the voltage (only on models
supplied with a voltage selector)
Make sure the voltage selector on the rear panel oi the
deck is set to the voltage of the local power supply. If not,
use a screwdriver to change it to the correct position
before connecting the AC power cord to a wall outlet.
VOLTAGE
SELECTOR
Connecting the AC power cord
Connect the AC power cord of the deck to a wall outlet.
Note
Do not connect the AC power cord to a switched outlet.
Advertising