Sony STR-D965 - Manual (Page 12)

Receiver Operations
Tuning preset stations (preset tuning)
You can tune directly to a preset station by entering its
preset number. If you don't know which stations are
preset on which numbers, you can tune by scanning
the preset stations.
1 Press TUNER.
The last received station is tuned in.
2 Press SHIFT to select a memory page (A, B or C),
then press the number.
For example, select A and then press 7 to tune in the
station preset as A7.
'Q'You can tune by scanning the preset stations
First press TUNER and then press PRESET TUNING + or
- to select the station you want. Each time you press the
buttons, the preset numbers change as follows:
• A1 A2 •.-►AO
—------------ •►CO-.-» ... -.-►C2-.—Cl .
- B O -
Indexing
You can index preset stations and then use the index
names to scan specific stations in the preset memory.
You can also use the index feature to label program
sources so that the receiver displays the names of the
components you connected, for example, "VHS".
DISPLAY
12
MODE control buttons
Indexing preset stations
-You might find that too many preset stations make it
hard to find the station you want. This receiver
includes a feature that lets you group preset stations by
name (station index) using up to 8 characters.
For example, if you label all of your preset jazz stations
"JAZZ," selecting "JAZZ" lets you skip over other
presets and scan all the stations labeled "JAZZ." Note
that you cannot assign more than one station index
name to each preset station.
1 Press TUNER.
The last station you received is tuned in.
2 Press DISPLAY so that "INDEX MODE" appears in
the display.
3 Tune in the preset station you want to create an
index for.
If you are not familiar with how to tune in preset
stations, see "Tuning preset stations (preset tuning)"
above.
4 Press DPC MODE repeatedly until the INDEX
indicator lights up.
5 Create a station index name by using the digital
processing control buttons as follows:
Press
A or V to select a character, and then press >
to move the cursor to the next position.
To insert a space, press
A or V until a blank space
appears in the display (the space is between and
The station index you created is stored
automatically.
If you've made a mistake
Press < or > repeatedly until the character you want to
change flashes. Then select the right character.
6 Repeat Steps 3 to 5 to assign index names to other
stations.
You can check the frequency of the indexed station
Each time you press DISPLAY, the display switches
between the frequency and the index name.
Scanning indexed stations (index tuning)
Once you select a station index, you can scan all the
stations wdth that station index.
1 Press TUNER.
The last station you received is tuned in.
2 Press DISPLAY repeatedly until "INDEX MODE"
appears in the display.
The station index for the last station you received
appears in the display.
If"_______ " appears
The station does not have an station index.
3 Press TUNING/INDEX SELECT + or - to select the
station index you want to scan.
4 Press PRESET TUNING -t- or - to select the station
you want receive.