Sony STR-D965 - Manual (Page 19)

Advanced Remote Operations
Operating One Component While
Using Another (background
operation)
You can temporality operate other components while
listening to or watching a program.
Numeric buttons
BACKGROUND-
CD
CH] CD} CD CD CD
CD CD CZD CD CD
o o o
CZD
o o o
CZI
o o o
CZD
o. [o
CZD
CD CD CZD CD CD
CD CD CD CD a
1 Hold down BACKGROUND.
2 Press both the corresponding numeric button of the
component you're going to use (see the table below)
and one of the following buttons at the same time;
VISUAL POWER, TV/VIDEO, CH PRESET +/-
ANT TV/VTR, D.SKIP, -M, M, ◄◄/►►,
/
Example: To start recording on a tape deck while
hstening to a CD
While holding down BACKGROUND,
press 4 (or 5) and press # + ► at the
same time.
The numeric buttons are assigned to select the
functions as follows:
Numeric button Operates
1 CD player
2 DAT deck
3 MD deck
4 Tape deck A
5 Tape deck B
6 LD player
7 VCR (remote control mode VTR 1*) v
8 VCR (remote control mode VTR 2*)
9 VCR (remote control mode VTR 3*)
0 TV
Sony VCRs are operated with a VTR 1, 2 or 3 setting.
These correspond to VHS, Beta and 8mm respectively.
Changing the Factory Setting of
a FUNQION Button
If the factory settings of the FUNCTION buttons (page
10) don't match your system components, you can
change them. For example, if you have two CD players
and you don't have a DAT or an MD recorder, you can
assign the DAT/MD button to your second CD player.
Note that the settings of the TUNER and PHONO
buttons cannot be changed.
Numeric buttons
CD _
CD IZZl CC Cn
OJ ZZI CC CD C3 1-
o o o
o o o
o o o
o ojo
a
CO
czi
CZD
CO
CO □ to CD CO
lO CO to to CO
SYSTEM
CONTROU
FUNCTION
1 Holding down the SYSTEM CONTROL/
FUNCTION button whose function you want to
change (DAT/MD, for example).
2 Press the corresponding numeric button of the
component you want to assign to the SYSTEM
CONTROL/FUNCTION button (1 - CD player, for
example).
For the numeric buttons, see the table in "Operating
One Component While Using Another."
Now you can use the DAT /MD button to control a
second CD player.
To reset the setting to the factory setting
Repeat the above procedure.
19