Sony CDP-C910 - Manual (Page 24)

Keeping the Program in Memory - Bank
1
Press BANK and the “BANK” indicator will turn on.
Choose the disc.
OOIDQO
OOQQID
Program the selections as your desire. (See page
14) Press BANK instead of PROGRAM for steps 2
and 4.
Lights up
2 4
----
(“- FILE will disappear approximately one
second later.)
24
After programming selections, you can keep the program
memorized, so that the disc is played always in the fixed
order. The memorized program is called “bank.”
Memorizing a Bank
The program is stored into the memory. (One disc can
memorize up to 24 programs.) Only one bank can be
made for a disc.
Notes
• You cannot program a whole disc under a single program
number.
• To pause during the bank play, press II Instead of step 4.
• If you press a DISC 1-10 buttons during the stop mode, the
bank stored for the disc is displayed.
Playing the Disc Using the Bank
1 Insert discs into the magazine and set the magazine into
the unit.
2 Press BANK to choose whether to play “1 DISC” or
“ALL DISCS”.
3 If you have any disc that you want to play before playing
the bank, or if you want to play in the 1 Disc mode,
choose the applicable disc.
icFi iBANKi I appears in the display.
4 Press ► to start play. When playing in the ALL DISCS
mode, any disc without a bank file will be played in its
entirety.
Clearing the Bank
1 Load the magazine with the disc that has the bank you
want to clear. Insert the magazine and choose that disc
with the DISC selectors or the DISC SKIP button.
2 Press BANK.
3 Press ERASE.
“FILE ERASE” is displayed and “CF BANK” goes off
from the display window. The bank is cleared.