Connections, For correct connections, Notes on line out – Sony CDP-C910 User Manual
Page 5: Note on optical digital out
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
For Correct Connections
Turn off the power of each unit before making
connections.
Connect the AC power cord last.
Be sure to insert the plugs firmly into the jacks.
Loose connection may cause hum and noise.
Leave a little slack in the connecting cord to allow for
inadvertent shock or vibration.
Cord plugs and jacks are color coded: Red plugs and
jacks are for the right channel (R) and white ones for the
left channel (L).
*Notes on LINE OUT
FIXED; The output level is fixed.
VARIABLE: The output level can be adjusted with PHONE
LEVEL/LINE OUT LEVEL control or LINE
OUT LEVEL buttons on the remote
commander. However, if the PHONE
LEVEL/LINE OUT LEVEL control is turned
while recording, the recording level will change
even when it is preset on the tape deck.
Note on optical digital out
Connect the optical out to the amplifier with the optical
input or D/A converter. When you connect, use the
connecting cable for optical out POC-15 (not supplied).
When the optical out is connected, you cannot use fade
out, fade in and time fade function.