Sony DCR-TRV103 - Manual (Page 31)

Using the Fader function
Notes
•The overlap function works only for tapes recorded in the Digitals U system.
• You cannot use the following functions while using the fader function. Also, you
cannot use the fader function while using the following functions.
- Digital effect
- Low lux mode of PRCX3RAM AE (Overlap function only)
- NightShot
+SI0W shutter
- Photo recording
When the OVERLAP indicator appears
The camcorder automatically memorizes the image recorded on a tape. As the image is
being memorized, the OVERLAP indicator flashes fast, and the playback picture is
displayed. At this stage, the picture may not be recorded clearly, depending on the tape
condition.
When START/STOP MODE is set to 1 or 5SEC
You cannot use the fader function.
While using the bounce function, you cannot use the following functions:
- Exposure
- Focus
-Zoom
-picture effect
Note on the bounce function
The BOUNCE indicator does not appear in the following mode or functions:
- D ZOOM is set to ON in the MENU settings
- Wide mode
- Picture effect
- PROGRAM AE
O
■o
31