Sony DCR-TRV103 - Manual (Page 65)

Troubleshooting
.... ..
Symptom Cause and/or Corrective Actions
The power does not turn on. • The battery pack is not installed, or is dead or nearly dead.
Irtstall a charged battery pack. (p. 8,9)
• The AC power adaptor is not connected to a wall outlet.
Connect the AC power adaptor to a wall outlet, (p. 11)
The end search function does not
work. •The tape was ejected after recording.
• You have not recorded on the new cassette yet.
The battery pack is quickly
discharged. • The operating temperature is too low.
• The battery pack is not fully charged.
■> Charge the battery pack again, (p. 9)
• The battery pack is completely dead, and cannot be
recharged.
•> Replace with a new battery pack. (p. 8) .
The battery remaining
indicator does not indicate
the correct time.
f
• You have used the battery pack in an extremely hot or
cold environment for a long time.
• The battery pack is completely dead, and cannot be
recharged.
Replace with a new battery pack. (p. 8)
• The battery is dead.
Use a charged battery pack. (p. 8, 9)
The cassette cannot be removed from
the holder.
• The power source is discomiected.
4 Connect it firmly, (p. 8,11)
♦ The battery is dead.
-» Use a charged battery pack or the AC power adaptor.
(p.8,9)
The SI and ^ indicators flash and no
functions except for cassette ejection
work. • Moisture condensation has occurred.
4 Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize, (p. 70)
>
a
a
(Continued on the following page)
65