Sony DCR-TRV103 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Symptom
Cause and/or Corrective Actions
The Remote Commander supplied
with your camcorder does not work.
• COMMANDER is set to OFF in the MENU settings.
Set it to ON. (p. 53)
• Something is blocking the infrared rays.
•> Remove the obstacle.
• The batteries are inserted in the battery holder with the +
- polarities incorrectly matching the + - marks.
^ Insert the batteries with the correct polarity, (p. 80)
• The batteries are dead.
Insert new ones. (p. 80)
The picture from a TV or VCR does
not appear even when your
camcorder is connected to outputs on
the TV or VCR.
• DISPLAY is set to V-OUT/LCD in the MENU settings.
^ Set it to LCD. (p. 53)
The melody or beep sounds for 5
seconds.
f
♦ Moisture condensation has occurred.
^ Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize, (p. 70)
• Some troubles has occurred in your camcorder.
Remove the cassette and insert it again, then operate
your camcorder.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
• The AC power adaptor is disconnected.
Connect it firmly, (p. 9)
• Something is wrong with the battery pack.
■> Contact your Sony dealer or local authorized Sony
service facility.
4^
66