Choose the dialing mode, If you aren't sure of your dialing system, Step 2: setting up the base unit (continued) – Sony SPP-A700 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting up the base unit (continued)
Notes
• Ust’ only the supplied At'-T4u AC power ad.iptor.
Do not use any other AC power adaptor.
• Conneet the AC power adaptor to a eontinuous power
supply.
• Place the base unit close to the AC outlet so that you
can unplug the AC power adaptor easily.
Polarity of the plug
Tips
It your telephone outlet isn't modular, contact your
telephone .service company for assistance.
To remoye the wall bracket, press the upper tab.
Modular
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
DIAL MODE switch
Depending on your dialing system, set the DIAL MODE switch as
follows:
If your dialing system is
Set the switch to
Tone
T
Pulse
P
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as is; otherwise, set to P.
10
™
Getting started