Setting locks and limits, To display the locks and limits screen, Return – Sony SAT-A2 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Locks and Limits
The Locks and Limits feature gives you control over the use of your
system. You can restrict program viewing by cost, ratings, and station.
You can also set a lock to prevent the ordering of pay-per-view
programs.
If your system is locked, the padlock
symbol appears
1,
and you must
first unlock it before you can make any
changes to the locks and limits settings.
See “Unlocking Your System" an
page 56 for details.
To display the Locks and Limits screen:
1
Select LOCKS AND LIMITS from the Options Menu.
The Set Locks and Limits screen appears, with the current settings
shown next to each button.
2
Select a lock or linrit from the screen (see the descriptions below).
SET LOCKS AND LIMITS
SPENDING LIMIT
STATION LOCKS
$
10.00
RATINGS LIMIT R
RETURN
LOCK
PAY-PER-VIEW UNLOCKED
HELP
0 STATIONS CURRENTLY LOCKED
Note
Your DSS receiver is shipped to you unlocked, with the default settings as
described below.
Spending Limit
Lets you set a maximum spending limit for a single
pay-per-view program.When the system is locked, you
cannot purchase a program that costs more than the
amount set. The default setting is
SIO.OO.
Ratings Limit
Allows you to set a maximum ratings limit. When the
system is locked, you cannot view programs rated
higher than the rating set. The default rating is
R.
Pay-Per-View
Allows you to prevent PPV purchases. When the
system and the PPV option are locked, pay-per-view
programs cannot be purchased. The default setting is
unlocked.
Station Locks
Lets you prevent the viewing of stations that you lock.
When the system is locked, programs that appear on
locked stations cannot be viewed. The default is
no
stations locked.
Note
After you've set
limits
take
effect.
lock or limit, you must lock the system before any locks or
Locking the system is described on page 55.
52
Chapter 5; Using the Options Menu