Using basic functions, Remote control for model sat-a2, Dss power button – Sony SAT-A2 User Manual
Page 7: Function buttons, Guide button, 9 and enter buttons, Joystickf-f- button, See also
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2
Using Basic Functions
You can start watching programs using just a few buttons on the
remote control. Here's an overview of the buttons you'll use most
often.
Remote Control for Model SAT-A2
DSS POWER Button
Turns the DSS receiver on and off.
FUNCTION Buttons
Selects the component (DSS, TV, CABLE) that you want to operate.
These buttons flash to indicate which component the remote control
is set to operate. To control your TV or cable box, you must first
program the remote control, as described on page 85.
GUIDE Button
Brings up the Custom Guide.
0-9 and ENTER Buttons
Pressing the 0-9 buttons and then the ENTER button selects a station
number directly.
Joystickf-f- Button
Moving the joystick up, down, left, right, and diagonally scrolls
through the program guides. Pressing the button selects the
program that's highlighted. When a program guide is not displayed,
pressing the -f- button brings up the Station Index.
CH/PAGE Buttons
Changes the channel. When a program guide is displayed, pressing the
CH/PAGE buttons pages through the guide.
See Also
□ Pages 9-10 for a quick start to using the program guide and the
Station Index.
□ Chapter 4 for procedures for using the main system features.
□ Pages 81-83 for a complete description of the buttons on the
remote.