Remote control for model sat-b2, Dss power button, Function buttons – Sony SAT-A2 User Manual
Page 8: 9 and enter buttons, Guide button, Arrow buttons, 4~ button, See also, 8 chapter 2: using basic functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Control for Model SAT-B2
DSS POWER Button
Turns the DSS receiver on and off.
FUNCTION Buttons
Selects the component (DSS, TV, CABLE) that you want to operate.
These buttons flash to indicate which component the remote control
is set to operate. To control your TV or cable box, you must first
program the remote control, as described on page 85.
0-9 and ENTER Buttons
Pressing the 0-9 buttons and then the ENTER button selects a station
number directly.
GUIDE Button
Brings up the Custom Guide.
Arrow Buttons
Scrolls through the program guide.
4~ Button
Selects the program that's highlighted. When a program guide is not
displayed, pressing the 4- button brings up the Station Index.
CH/PAGE Buttons
Changes the channel. When a program guide is displayed, pressing
the CH/PAGE buttons pages through the guide.
See Also
□ Pages 9-10 for a quick start to using the program guide and the
Station Index.
□ Chapter 4 for procedures for using the main system features.
□ Page 84 for a complete description of the buttons on the remote.
8 Chapter 2: Using Basic Functions