Canon i 900D - Manual (Page 17)

16
3
Specify the number of copies to print.
(1) Using the buttons, select the image you wish to print.
(3) Repeat steps 1 1 1 1 and 2 2 2 2 and specify the number of copies for each image you wish
to print.
(4) Press the OK OK OK OK button.
The print confirmation screen is displayed.
4
Start printing.
(1) Confirm the print settings. To change any of the settings, press the Settings Settings Settings Settings
button.
See “Specifying the Paper and Optimizing Images” on page 23.
(2) Press the Print Print Print Print button.
The specified number of copies for each image will be printed.
„ Printing a specified area - Trimming
When Trimming Trimming Trimming Trimming is displayed below Specify images Specify images Specify images Specify images, Select layout Select layout Select layout Select layout, Printing an Image Printing an Image Printing an Image Printing an Image,
the image displayed can be trimmed.
Note For each image selected you can also set the area to print using the
Trimming function.
See “Printing a specified area - Trimming” below.
Note Please trim the image after specifying the Paper Size Paper Size Paper Size Paper Size, Paper Type Paper Type Paper Type Paper Type,
Borderless/Bordered Borderless/Bordered Borderless/Bordered Borderless/Bordered on each settings screen. If you change the
settings after trimming the image, the trimming selection will be lost.
(2) Use the buttons to specify the number
of copies to print.