Canon i 900D - Manual (Page 31)

30
4
Exit the Photo Viewer.
Notes Changing the Display Mode
To change the display mode of the Photo Viewer, press the F3 F3 F3 F3 key on the
keyboard or click the display selection button on the screen.
The Photo Viewer is terminated in the following case:
z When a compatible digital camera or digital video camcorder is connected.
z When Read/write mode
Read/write mode Read/write mode Read/write mode is selected in the Memory Card Utility (Windows) or
BJ Utility (Macintosh).
z When a USB cable is disconnected.
Saving the data stored in the memory card to the hard disk of the computer
z The image data (JPEG/TIFF format)/movie data (AVI/MPEG)/or sound data
(WAVE) stored in the memory card in the card slot can be saved on the hard
disk of the computer.
z Keep pressing the Photo Viewer Photo Viewer Photo Viewer Photo Viewer button on the operation panel for 3 seconds
or longer. Saving of the image data starts and the name of the file currently
being saved and the name of the destination folder are displayed in the
Photo Viewer
Photo Viewer Photo Viewer Photo Viewer window.
z If you press the Cancel Cancel Cancel Cancel button during the save operation, the save operation
will be stopped.
z The images will be saved in the location specified below. A folder will be
created with a name and the date of the images were saved (YYYY_MM_DD).
- Windows XP/Windows 2000/Windows Me: My Pictures
My Pictures My Pictures My Pictures folder
- Windows 98: My Document My Document My Document My Document folder
- Mac OS X 10.2.1or later: Pictures Pictures Pictures Pictures folder
- Mac OS 9.0-9.2: Desk Top
(1) After printing finishes, press the Photo Viewer Photo Viewer Photo Viewer Photo Viewer button to exit
the Photo Viewer.
To exit the Photo Viewer before printing finishes, cancel
printing and then press the Photo Viewer
Photo Viewer Photo Viewer Photo Viewer button.
The display selection button The display selection button