Canon i 900D - Manual (Page 37)

36
Replacing Ink Tanks
When ink tanks run out of ink, replace them using the following steps.
1
Ensure that the printer is on, and then open the front cover.
The print head holder moves to the center.
2
Remove the empty ink tank.
(1) Push the tab in and remove the ink tank.
3
Prepare a replacement tank.
(1) Unpack the new ink tank and pull off the orange tape.
(2) Remove the orange protective cap from the bottom of the ink tank and discard it.
Important z Handle ink tanks carefully to avoid staining clothing or the
surrounding area.
z Discard empty ink tanks according to the local laws and regulations
regarding disposal of consumables.
Important z Do not squeeze the side of ink tanks as this may cause the ink to leak
and stain your clothes and hands.
z Do not re-attach the protective cap once you have removed it.
z Once the protective cap is removed, do not touch the open ink port.
z Ensure that all the orange tape has been peeled off along the
perforation. If there remains a part of the orange tape, ink may not be
ejected correctly.
Do not touch the lock lever; remove
only the ink tank.