Canon i 900D - Manual (Page 18)

17
1
Set the Trimming Mode.
(1) Display the setting screens for Printing an Image, Specify images Specify images Specify images Specify images and Select Select Select Select
layout layout layout layout.
See “Printing an Image Displayed on the LCD” on page 10.
See “Specifying how many copies to print for each image” on page 15.
See “Specifying the layout” on page 20.
(2) Press the Trimming Trimming Trimming Trimming button.
The printer is now in Trimming Mode.
2
Trimming and Rotating the Sections you wish to Print.
3
Finalize the trimmed area.
(1) Press the OK OK OK OK button.
The trimming area is finalized and the screen returns to the state when the
Trimming
Trimming Trimming Trimming button was pushed.
Trimming Trimming Trimming Trimming
Button
Enlarge/Reduce the area for trimming
Using the
buttons, you can enlarge or reduce
the trimming area.
Move the area for trimming
Using the
buttons, you can move the
trimming area.
Rotate the trimming area
Using the Trimming
Trimming Trimming Trimming button, you can rotate the
trimming area.
This mark indicates that
Trimming
Trimming Trimming Trimming is set.
Notes z Once the trimmed area is finalized, if
you press the Trimming Trimming Trimming Trimming button again,
you can modify the trimmed area.
z If you want to cancel the Trimming Trimming Trimming Trimming
setting, press the Trimming Trimming Trimming Trimming button
and then the Cancel Cancel Cancel Cancel button in the
Trimming Trimming Trimming Trimming screen.