Connecting two vcrs for tape editing, Notes – Sony KP-41T25 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting two VCRs for tape editing
You can record input images displayed on the screen.
This type of connection should be used only when you
connect from the line input of one VCR, and from the
line output of a second VCR.
KP-41T2S
(Rear of projection TV)
KP-46S17IS3S17
(Rear of projection TV)
Notes
• X)
q
not change the input signal while editing, or the output
signal will also change.
• When connecting a single VCR to the projection T\', do not
connect MONITOR OUT to the V'CR's line input, while at the
same time connecting from the projection TV's VIDEO IN jacks
to the VCR's line output.
• You can use the S \ ideo connector to connect a VCR for
playback and the composite video jack to connect a V'CR for
recording.
“^4-EN I Getting Started