Operating video equipment, Setting the manufacturer's code – Sony KP-41T25 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To turn off the captions or text
Press DISPLAY on the remote commander.
Each time you press DISPLAY, the display changes as
follows:
►XDS*—►Caption Vision or Text
DISPLAY OFF <•--------------------'
on-screen information-
Operating video
equipment
"DISPLAY OFF" goes off after three seconds.
* Some programs are broadcast with XDS service which shows a
network name, program name, program length, call letters and
time of the show. When you select XDS with the DISPLAY
button, this information will be displayed on the screen if the
broadcaster offers this service.
Note
• Captions may appear with a white box or another error instead
of a certain word. Poor reception of TV programs can also
cause errors in Closed Caption.
You can operate a piece of video equipment that has an
infrared remote sensor with the supplied remote
commander. Before operating, set the manufacturer's
code number.
Setting the m anufacturer's code
MODE
Low position
cmoc=o;
o o o
o o o-
o o o
-CODE SET
-0-9 buttons
-ENTER
While holding down CODE SET, press 0 - 9 to
enter the manufacturer's code number (see the
chart on page 35) and press ENTER. For
example, to operate a Sony 8 mm VCR, press 0,
2 and ENTER.
+
ENTER
(continued)
Operations
39-EN