Craftsman 320. 28180 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tabie A shows the correct size to use, depending on cord iength and ampere
rating, if in doubt, use the next heavier gauge: the smaiier the gauge number,
the heavier the cord.
When operating a power tool outdoors, ALWAYS use an outdoor extension
cord marked “W-A” or "W.” These cords are rated for outdoor use and re
duce the risk of eiectric shock.
Minumum Gauge for Extension Cords
Volts
Total Length of Cord in Feet
120V
0-25ft.
25-50ft.
51-100ft.
101-150ft.
Ampere Rating
AWG
AWG
AWG
AWG
More than 0
Not more than 6
18
16
16
14
More than 6
Not more than 10
18
16
14
12
More than 10
Not more than 12
16
16
14
12
More than 12
Not more than 16
14
12
Not Recommended
PERSONAL SAFETY
WARNING: Use of this product can generate dust containing chemicals
known to the state of California to cause cancer, birth defects or other reproduc
tive harm. Some exampies of these chemicals are:
e Lead from lead-based paints.
e Crystaiiine sliica from bricks and cement and other masonry products.
e Arsenic and chromium, from chemically treated lumber.
Your risk from these exposures varies, depending upon how often you do this
type of work. To reduce your exposure to these chemicals:
» Work in a well-ventilated area.
e Work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling
and other construction activities. Wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your mouth, eyes or lay on
the skin may promote absorption of harmful chemicals.
28180 ManuaLFtevisecl_07O228
Page 7