Maintenance, Owner’s responsibilities, Product specifications – Craftsman 580.767451 User Manual

Page 12: Pressure washer specifications, Engine specifications, General recommendations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MAINTENANCE

OWNER’S RESPONSIBILITIES

Follow the hourly or calendar intervals, whichever occurs first.

More frequent service is required when operating in adverse conditions noted below.

fiSAÍNTEMANCE SCHEDULE.

FILL

IN

DATES

AS

¥OU

COMPLETE

...................REGULAR SERVICE :.................................

MAINTENANCE TASK

HOURLY OPERÄTINO INTERVAL

Before

Each

......Use........

Every 26

Hours or

Yearly

Every 50:

Hours or

Yearly

Every 100

Hours or

Yearly

SERVICE DATES

PRESSURE WASHER

Check/cîean water inlet screen
on pump.

Xt

Check high pressure hose.

Check detergent hose.

Check spray gun and assemdiy for leaks.

Puige pump of air and ccmtamlnanis.

Change pump oi!

ENGINE
Check oil level.

Service air cleaner.

X**

Change engine oil.

Repiace spark piug

Service spark arrester

X*

Prepare for storage.

Prepare unit for storage if it is to remain idle for longer than 30 days.

t

Clean if clogged. Replace if perforated or tom.

* Change oil after the first (5) operating hours and every 50 hours thereafter. Change eveiy 25 hours when operating under dirty or

dusty conditions.

“ Repiace more often under dirty or dusty conditions.

PRODUCT SPECIFICATIONS

Pressure Washer Specifications

Pressure.....................................2,500 PSI
Flow Rate.......... .........................2.5 GPM

Chemical Mix..............................Use as directed
Water Supply Temperature........Not to Exceed 10Q“F
Shipping Weight......................... 102 lbs.

Engine Specifications

Rated Horsepower.....................6.75 HP

Spark Plug Type:

Resistor................................ Champion RC12YC

Long Life Platinum .............. Champion RC12PYP

Set Gap To; ......................... 0.020 inches (0.50 mm)

Fuel Capacity............................. 1.6 Quarts

Oil

Above 40* F ................. SAE 30
0“F - 40“F...................... SÄE 5W-30 or 10W-30

GENERAL RECOMMENDATIONS

The pressure washer’s warranty does not cover items
that have been subjected to operator abuse or

negligence. To receive full value from the warranty,

the operator must maintain pressure washer as

instructed in this manual including proper storage as
detailed in ’’Storage” on pages 17-18.

Some adjustments will need to be made periodically to
properly maintain your pressure washer.

Ail service and adjustments should be made at least

once each season. Follow the requirements in the
"Maintenance Schedule” chart above.

NOTE:

Once a year you should clean or replace the

spark plug and replace the air filter. A new spark plug
and clean air filter assure proper fuel-air mixture and
help your engine run better and last longer.

If equipped with inflatable tires, keep the air pressure
at the value marked on the tire or within 15 and 40 psi.

12

Advertising