Craftsman 580.767451 - Manual (Page 4)

^WARNING
¥r
starter and other rotating parts can entangle
hands, hair, clothing, or accessories.
DO NOT wear loose clothing, Jewelry or anything that
may. be caught in starter or other: rotating parts.:::::::
Tie up long hair and remove jewelry. .......................
^WARNING
Unintentional sparking can result in fire or
electric shock.
WHEN ADJUSTING OR MAKING REPAIRS TO YOUR
PRESSURE WASHER ^ ^ ^ ^ ^ ^ ^ ^
Disconnect spark plugi wire from spark plug and place
wire where it cannot conMct spark plug;::::::::::::::::::::
^WARNING
High pressure spray can cause paint chips
or other particles to become airborne.
•: Always wear eye pnstection when using equipment or when:
n vicinity of equipment in use,......................................
A CAUTION
Excessively high or low operating speeds increase
risk of injury and damage to pressure washer.
•: DO NOT tami№r with governed speed; : :: : t : :: -
• DO NOT operate pressure washer above rated pressure.
^CAUTION
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
secure spray gun in open position.: : :
leave spray gun unattended: »rfiile machine
iS
DO NOT
DO NOT
running.
NEVER use a spray gun which; does not: have a trigger
lock or trigger: guard in place and: in working order.
Always be certain spray gurs, nozzles and accessories
are correctly attached.^
CAUTION
High pressure spray may damage fragile items
including glass.
DO NOT point spray gun at giass: when ih j:et spray mode.
NEVER aim spray gun at plants. ...................................
CAUTION
Improper treatment of pressure washer can
damage it and shorten its life.
If you have questions about intended use, ask dealer or
contact Sears. ■ t :........: t,:: t,:::: .... ..... : ■
NEVER operate units with broken or missin:g parts,:or
without: protective :housingi or: covers.:
DO NOT by-pass any safety device on this machine.
Before starting pressure washer in cold weather,: check
all: parts of the equipment to be sure ice has not formed
there,
t... ..... : t:':,::
NEVER move machine by pulling on high pressure hose
Use handle provided on unit,: j: ::: j: : : :
: ::::: T
Check fuel system for leaks or signs of deterioration,: :
chafed: or spongy hose,; loose or missing t j t
or damaged tank
or cap. Correct: all defects t t
before operati:ng pressure washer; :
This equipment is designed to be used
authorized parts ONLY, if equipment is used with
that DO: NOT comply with minimum specifications
assumes ail risks and liabilities,..
such as
clamps,
with Sears
parts
.user