Attaching the handwheel, Attaching handwheel – Craftsman 113.2472T0 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
ATTACHING THE HANDWHEEL
1. From loose parts bag find one (1) pan head screw
10-32 X 2 and one (1) hex nut. Install the hand
wheel. Reach inside the base to the back side of
the bevel mechanism and put the nut in place.
Hold the nut in place with a finger, install the
screw through the center of the handwheel and
tighten with a phillips screwdriver,
2. Hold the handle and pull the red release button
with your finger to close the handle.
17
Advertising