Craftsman 113.2472T0 - Manual (Page 37)

Always order by Part Number - Not by Key Number
FIGURE 3 - BEVEL DRIVE AND MOTOR MOUNT ASSEMBLY PARTS
PARTS LIST FOR CRAFTSMAN 12-INCH BAND SAWS
MODELS 113.247210 AND 113.247310
Key
No.
Part
No. Description
Key
No.
Part
No. Description
1
816499 Handwheel Assembly 24 809372-18 Screw, Pan Hd. 10-32 x 2
2 816386 Knob, Bevel Lock 25 STD541110 •Nut. Hex 10-32
3 816381 Pinion, Handwheel 26 816504 Support Frame
4 816384 Gear, Handwheel 27 816354-1 Washer. Plastic 2.53 x 6 x .03
5 816543 Cover. Bevel Gear 28 816422 Mount, Motor
6
816382 Shaft. Bevel 29 STD580103 ‘Key 3/16 Sq. x 15/16
7 STD571207 *Pin. Roll 1/8
X
3/4 30 816389 Pulley, Polyrib 4 in.
8 815865-2 Screw, Hex Washer Hd. 31 STD503105 ‘Screw. Set 5/16-18
X
1/2
Ty TT 1/4-20
X
5/8 32 816439-2 Belt, Poly V
9 9414202 Nut, Lock 3/8-16 33 816613 Motor
10 805556-23 Washer, .380 x .750 x .03 34 802392-25 Spacer, Motor Mount
11 816452 Spacer 9/16 x 1/4 #10
X
5/16
1 2
60317 Washer, 21/32 x 1 x 1/64 35 816369 Pulley, Polyrib 1 in.
13 816443 Gear, Segment 36 816815 Stud, Belt Tension
14 816348 Pinion, Bevel Drive 37 STD541631 *Nut, Die Cast Wing 5/16 x 18
15 802392-38 Spacer 1 / 2 x 2 3 8 816817 Nut. Hex Flange Lock 10-32
16 805562-1 Washer, .507 x 1.25 x 125 39 816354 Washer, Plastic 3.8 x 6 x 03
17 60208 ★ Nut, Push 1/4 40 816445 Bushing, Rubber
18 60240 ★ Nut, Push 3/8 41 STD551012 •Washer 17/64 x 1/2 x 1/32
19 816360 Cam, Bevel Lock 42 815992-1 Screw, Hex Socket Head
20 816359 Mount, Bevel Lock
Ty "TT” 1./4-20
X
3/4
21 816465 Spacer 1/2 x .59 43 STD551125 'Lockwasher 1/4
22 815774-3 Rivet 1/4 X 1-1/8 44 STD502605 ’Screw, Soc. Set 1/4-20 x 1/2
23 60419 Screw, Pan Hd.
Plastite No 8 x 1/2
•Standard Hardware Item may be Purchased Locally.
★ If this part is removed, discard and replace with new push nut.
37