Symbols, Symbols -7 – Craftsman 315.284620 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYMBOLS
1
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper inter
pretation of these symbols will allow you to operate the tool better and safer.
A
Safety Alert
Indicates a potential personal injury hazard.
©
Read Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
0
Eye Protection
Always wear eye protection with side shields marked to
comply with ANSI Z87.1,
No Hands Symbol
Failure to keep your hands away from the blade will result
in serious personal injury.
€)
Wet Conditions Alert
Do not expose to rain or use in damp locations.
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watt
Power
min
Minutes
Time
Alternating Current
Type of current
srs
Direct Current
Type or a characteristic of current
no
No Load Speed
Rotational speed, at no load
0
Class II Construction
Double-insulated construction
,,,/min
Per Minute
Revolutions, strokes, surface speed, orbits etc., per minute