Cabletron Systems 6H129-08 - Manual (Page 141)

RMON Statistics Screen
6H128-08 and 6H129-08 User’s Guide 5-95
128 - 255 Octets (Read-only)
Displays the total number of frames, including bad frames, received that
were between 128 and 255 bytes in length (excluding framing bits, but
including FCS bytes).
256 - 511 Octets (Read-only)
Displays the total number of frames, including bad frames, received that
were between 256 and 511 bytes in length (excluding framing bits, but
including FCS bytes).
512 - 1023 Octets (Read-only)
Displays the total number of frames, including bad frames, received that
were between 512 and 1023 bytes in length (excluding framing bits, but
including FCS bytes).
1024 - 1518 Octets (Read-only)
Displays the total number of frames, including bad frames, received that
were between 1024 and 1518 bytes in length (excluding framing bits, but
including FCS bytes).
Index: [nn] (Command)
This command is used to enter an index number for viewing statistics. For
instructions on how to use this command refer to
Section 5.28.1 .
CLEAR COUNTERS (Command)
This command is used to reset all statistic counters to zero. For details on
how to use this field, refer to
Section 5.28.2 .
5.28.1 Displaying RMON Statistics
To display the statistics for any index, proceed as follows:
1. Use the arrow keys to highlight the Index: [nn] field at the bottom of
the screen.
2. Press the SPACE bar to increment (or press the DEL [delete] key or
the BACKSPACE key to decrement) the index number.
3. Press ENTER (neither the RMON Index field nor the statistics will
change until ENTER is pressed).