Cabletron Systems 6H129-08 - Manual (Page 42)

Chapter 4: Troubleshooting
4-4 6H128-08 and 6H129-08 User’s Guide
TX
(Transmit)
LED for
ports 1–6,
also ports
7 and 8,
with
optional
FE-100FX
or
FE-100F3 Off Port enabled, and no
activity. Should flash
green every 2 seconds
indicating BPDUs
being sent if STA is
enabled and there is a
valid link. 1. Ensure that the STA is
enabled and that there is a
valid link.
2. If still not working, contact
the Cabletron Systems
Global Call Center.
Green Flashing. Indicates
activity. Rate indicates
data rate. None.
Amber Blinking. Port in
standby, link.
Port may be disabled
due to Spanning Tree. 1. Ensure that the port is not
disabled (unless desired).
2. If still not working, contact
the Cabletron Systems
Global Call Center.
Red Flashing. Indicates
collision rate. No action, unless a high
amount of activity; check for
network configuration
problems or a bad device.
Solid. Diagnostic
Failure. Contact the Cabletron
Systems Global Call Center.
Table 4-1 LANVIEW LEDs (Continued)
LED Color State Recommended Action