Cabletron Systems 6H129-08 - Manual (Page 63)

Chassis Configuration Screen
6H128-08 and 6H129-08 User’s Guide 5-17
5.7 CHASSIS CONFIGURATION SCREEN
The Chassis Configuration screen, Figure 5-9 , allows the user to set the
chassis date and time, screen refresh and lockout time, IP address, subnet
mask, the Operational Mode of all modules installed in the chassis, and to
view the chassis uptime.
Access the Chassis Configuration screen from the Chassis Menu screen
by using the arrow keys to highlight the CHASSIS CONFIGURATION
menu item and pressing ENTER. The Chassis Configuration screen,
Figure 5-9 , displays.
Figure 5-9 Chassis Configuration Screen
The following briefly explains each Chassis Configuration screen field:
MAC Address (Read-Only)
Displays the physical address of the chassis.
IP Address (Modifiable)
This field allows the IP address to be set for the 6C105 chassis. If an IP
address is assigned to the 6C105 chassis all the interface modules
installed in the chassis can be managed via this IP address, eliminating the
need to assign an IP address to each interface module. To set the IP
address, refer to
Section 5.7.1 .
Chassis Configuration
2159-41
MAC Address:
IP Address:
Subnet Mask:
Chassis Date:
Chassis Time:
Screen Refresh Time:
Screen Lockout Time:
Operational Mode: [802.1D SWITCHING]
Chassis Uptime XX D XX H XX M
00-00-ID-00-00-00
000.000.000.000
000.000.000.000
6C105 LOCAL MANAGEMENT
Event Message Line
RETURN SAVE
10/11/1997
14:23:00
30 sec
15 min
EXIT