Cabletron Systems 6H129-08 - Manual (Page 108)

Chapter 5: Local Management
5-62 6H128-08 and 6H129-08 User’s Guide
5.18 SWITCH CONFIGURATION SCREEN
The Switch Configuration screen, Figure 5-24 , provides the basic setup
options to make a switch operational in your network.
To access the Switch Configuration screen from the Module
Configuration Menu screen, use the arrow keys to highlight the SWITCH
CONFIGURATION menu item and press ENTER. The Switch
Configuration screen,
Figure 5-24 , displays ports 1 through 8. To view or
edit the fields for ports 9 to 12, highlight [9-12] at the bottom of the
screen and press the ENTER key.
NOTE
The Switch Configuration screen will not be available if the
operational mode of the module has been set to SECURE
FAST VLAN. This screen may only be used by modules
configured to operate as 802.1D or 802.1Q switches.
NOTE
Ports 7 and 8 on the Switch Configuration screen represent the
optional Fast Ethernet Interface Modules available for the
6H12X-08.
Ports 9 through 12 represent the backplane connections that
the module has with the 6C105 chassis. The module has a
direct connection to every other slot in the chassis.