Compex Technologies WP11A+ User Manual
Page 31
Advertising
Chapter 5
Configure Compex WP11A Using Web Interface
21
The physical setup of Per Group Pseudo VLAN is illustrated as shown.
Figure 5.3b
Physical Setup for Wireless to Ethernet Bridging
Starting Point
The default mode for Compex WP11A+ is in AP Bridge, therefore no further
configuration is required.
1. Activate
uConfig program. Click on “OpenWeb” button. You are now in the default
web page of Compex WP11A+.
Figure 5.3c
Device in AP Bridge Mode
Internet
Group 1
Group 2
Group 3
Switch/Hub
WP11A+
Server
The device is in AP
Bridge Mode.
Advertising