Compex Technologies WP11A+ - Manual (Page 38)

Chapter 5 Configure Compex WP11A Using Web Interface
28
5.4 Setting up Wireless LAN-to-LAN Bridge Network using AP Client Mode
Compex WP11A+ may be configured as a wireless client, functioning in conjunction
with another IEEE 802.11b-compliant Access Point to perform transparent Bridging
between two Fast Ethernet networks.
The following physical layout of a Wireless LAN-to-LAN Bridge shows Compex
WP11A+ functioning as an ESS Client, performing Fast Ethernet LAN-to-LAN
Bridging by accessing an ESS Access Point.
Figure 5.4a Physical setup of Wireless LAN-to-LAN Bridge
Compex WP11A+
operating as an
AP Bridge
Compex WP11A+
operating as a
Client
Internet &
Wireless Bridge