Compex Technologies WP11A+ User Manual
Page 44
Chapter 6
Setting up Wide Area Network using Gateway Mode
34
6. Next, remove cable from your workstation and insert it into your modem’s Ethernet
port.
Figure 6.2b
Connect Compex WP11A+ to modem
7. Power on your broadband modem and wait for it to complete the initialization
process which may take a minute or more.
8. Next, power ON the Compex WP11A+. When either of the 10M or 100M Ethernet
LED lights up, this shows that there is a cable connection between the ADSL
modem and the Compex WP11A+.
9. Power ON the PC/notebook and the WLAN port LED should light up after entering
the Windows environment. This indicates good cable connection between the PC
and the Compex WP11A+.
10. Once everything is checked, you can now access to the Internet.
WP11A+
Cable/ADSL
Modem
Internet
Either PC or notebook
xx