Operation coni, A warning, Warning – Craftsman 286.25574 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION coni.
REMOVING BLADES FROM SAWcont (See Figs, 12-15)
Fig. 13
Blade Guard
Retracted
ATTACHING REPLACEMENT BLADES TO THE SAW (See Figs. 16 -19)
A WARNING:
This Twin Cutter saw uses specially designed
6
Va-in. blades
and no other types or sizes of blades should ever be used. Other types and sizes
of blades will not operate safely irt this saw and could result in serious personal
injury.
See the accessories section of this manual for the proper replacement blades
that are needed for this saw.
1, Unplug Ihe saw.
A
WARNING:
Failure to unplug the saw could result in accidental starting
causing possible serious personal injury.
'
2. Lay the saw down with the blade arbor pointing upward.
3. Place blade “A“ onto the blade flange with the “A“ clearly visible (see Fig. 16),
4. Align the holes on the blade with the pins on the flange and securely fit the blade
on the flange (see Fig. 17).
5. Place blade “B" onto the arbor with the ”B” easily visible, then thread lock nut
onto shaft.. DO NOT tighten, {see Fig. 18).
6
. Turn the blades so that the holes In both blades are lined up.
18