Craftsman 286.25574 - Manual (Page 9)

DESCRIPTION
Before attempting to use any tool, be sure to familiarize with all the operating
features and safety instructions.
A WARNING: DO NOT let femiliarity with your saw make you careless.,
Remember that a careless fraction of a second is sufficient to causa severe injury.,
KNOWYOUR SAW (SEE Fig. 1)
Your Twin Cutter saw has many built-in convenience featores for fast, efficient cutting.
These features include a Innovative 2-blade system with speciat blades that spin in
opposite directions to provide smooth, clean cuts. It also includes a pre-instalied
blade lubricating system for use when cutting aluminum, copper, stainless steel and
cast iron. The auxiliary handle mounts on the top of the saw to provide maximum
support and ease of handling.
For your convenience, there Is no assembly required for your Twin Cutter Saw. The
special 2-blade cutting system and the wax lubricating system are already installed
Assist Handle
Lower Blade
Guard Handle —
Upper Blade Guard
On/Otf Switch
Fig.1
Wax
Lubricating
Stick
Wrench
Wax Lubricating
System Knob
Blades
Motor
Housing
Lower Biade Guard
PRODUCT SPECIFICATIONS -, '
Input 7,8Amps
Output 1.25-Peak HP
Blade Diameter eva in, (i5Smm)
RaUng 120 volls, 60 Hz AG
No-load Speed 4600 RPM
Maximum Depth of Cut wood {1% In.) métal (with a wall or shset thicimess of 1/8 in.)
Duty Cycle 30 minutes on 10 minutes off (see page 12)
UNPACKING
Your Twin Cutter Saw has been shipped completely assembled. Inspect the saw
carefully to make sure that no breakage or damage has occurred during shipping.
If any parts are damaged or missing return the saw to your nearest Sears Store to
have it replaced.___________________________________________________________
A
WARNING:
If any parts are missing, DO NOT operate this saw until the
missing parts are replaced. Failure to do so could result in possible serious
personal injury__________________________________________________________
5-26-06