Craftsman 139.53674SRT User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Please read and comply with the warnings and reinforcement instructions on page 24*
They apply to one-piece doors also.
' Center the bracket on the top of the door, in line
wiUi the header bracket as shown, Mark hdes.
' Ddii 5/16* pilot holes and fasten the door bracket
with hardware suppr№d.
If the door has no exposed framing, drill 3/16* pilot
holes and fasten the bracket with S/IS^xl-l/a* lag
screws (not provided) to the tqp of dte door.
The door bracket may be instatied on Pte top
edge of the door if required for your fnstafiation.
(Refer to the dotted iine c^tiona) placement
drawing.) DHtt S/ie* pilot hoies and substitute
lag screws (not provided) to fasten
the bracket to the door.
25