Maintenance, Maintenance schedule – Craftsman 107.27768 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAINTENANCE
MAINTENANCE SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
RIDER MAINTENANCE, All Models
Before
Each Use
Spring
& Fall
8
Hours
25
Hours
100
Hours
200
Hours
Yearly
Clean Debris from Rider and Engine Compartment *
•
Clean Debris from Engine Cooling Areas & Air Filter *
•
Check Tire Pressure
•
Lubricate Rider & Mower *
•
Clean Deck & Check/Replace Mower Blades
e
Clean Battery & Cables
•
Check Rider Safety System **
•
•
•
Check / Adjust PTO Clutch
e
ENGINE MAINTENANCE,
19HP Briggs & Stratton
8 Hours
or Daily
25 Hours
or Every
Season
50 Hours
or Every
Season
100 Hours
or Every
Season
200 Hours or
Every Season
Yearly
Check Engine Oil Level *
•
Service Air Pre-Cleaner *
•
Change Oil *
•
Service Air Filter *
•
Change Oil & Filter *
•
Clean Cooling Fins *
•
Replace Air Filter *
•
Replace Spark Plugs
•
Replace Fuel Filter f
m
Check Valve Clearance f
•
* More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer,
t These services should be performed by Sears or other qualified service dealer.
17