Mounting the lens a, Zooming – Nikon AI-S Zoom-NIKKOR 35-105mm f-3.5-4.5 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

(except F-401/N4(X)4*). The meter coupling ridge atrd automatic
diaphragm function together to permit full aperture exposure meas­

urement, For non-AI type Nikon cameras, this lens is also fitted
with a meter coupling shoe to permit the same operation.

•The Nikon N4(X)4 is sold exclusively in the U.S.A.

MOUNTING THE LENS--------------------------------- A

Position the lens in the camera’s bayonet mount, aligning the green
aperture index on the lens with the lens mounting index on the

camera. Then, twist the lens counterclockwise until it clicks into

place. To remove, depress the lens release button on the camera and
twist the lens clockwise.
Notes:

1) When mounting the lens on an Al-type camera with a lifl-up

meter coupling ¡ever, make sure the lever is in the “down ’’po­
sition; when mounting on a camera without this lever (non-AI

type), “manual’’ maximum aperture indexing is required. For
more information, refer to the camera’s instruction manual.

2) When the lens is used with the Nikon F-401 /N4004, the camera

meter coupling function does not operate and the exposure in­

dicator LEDs do not appear.

-B

ZOOMING----------------------------------------------
To zoom in and out, look through the viewfinder and slide

the focusing/zooming ring back and forth until the desired

composition is framed on the focusing screen. As the ring is

pushed forward for longer focal lengths, a four-position
scale (35mm, 50mm, 70mm, and 105mm) is uncovered on

the lens barrel to show which focal length the lens is set for.

Of course, you can use intermediate settings. To preset the

lens for a specific focal length, align the edge of the focusing
ring with the top edge of the digits of the desired focal
length.

Advertising