Nikon Camera F50 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Make sure the film is properly positioned with no slack and the film
perforations engage the sprockets. (See illustration.)
5
Gently close the camera back
until the lock release snaps
closed.
Film automatically advances to
frame #1.
• If the frame counter still shows
E
(i.e., if the film does not advance
to frame #1), with or without
blinking Err and
0
,
the film is
incorrectly positioned. Reload
film.
• You can confirm the film speed of installed DX-
coded film. See page 35.
•With a non-DX-coded film, film speed must be set
manually. See page 35.
11
Advertising