Using built-in flash, Notes on using built-in flash, Using built-in flash -55 – Nikon Camera F50 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
USING BUILT-IN FLASH
/
n
Notes on using built-in flash
Do not touch the flash when it is firing;
normal operation can cause it to heat up.
Never fire the flash more than 20
consecutive times at intervals of 5 sec.
or shorter. This may impair flash
performance. After each continuous
firing, let the flash rest at least 10
minutes before firing again.
When you continuously fire the flash,
the camera’s handgrip may become hot;
this is normal. Continuous firing will
result in a longer interval before the
ready-light comes on because it takes
longer for the flash to recharge
automatically.
V
Advertising