Nikon Camera F50 User Manual
Page 92
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
In certain cases, due to static electricity or poorly
loaded batteries, the camera's microcomputer
may turn the camera off, even with fresh properly
installed battery. For the same reason, film may
not advanced properly. In each of these cases, to
resume operation, simply turn the power OFF,
then turn ON again, or remove battery and install
it again.
Nikon cannot be held responsible for any
malfunction resulting from the use of the camera
other than as specified in this manual.
Advertising