Attaching receiver to bracket (optional) – Nikon ML-3 Modulite Remote Control Set User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Insert the camera plug with the A symbol on the
■ plug pointing upwards into the remote terminal
of the camera. Then screw the threaded ring
into the terminal.
• Make sure the remote cord does not obstruct
the camera lens or the reception sensor on the
receiver.
• To conserve battery power, detach the remote
cord from the camera when not in use.
Attaching receiver to
bracket (optional)
When shooting with a Speedlight
attached to the camera’s
accessory shoe, attach the
receiver by using the bracket.
11
Advertising