Nikon ML-3 Modulite Remote Control Set User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Connect the receiver’s
■ camera plug to camera’s
remote terminal.
Set the Speedlight’s power
■ • switch to STBY.
Start shooting. For details on
flash shooting, see
Speedlight instruction
manual.
' Be sure to lightly press the
transmission button a few
seconds before triggering
to allow for Speedlight
power recharge.
• In continuous shooting,
make sure the
Speedlight’s firing intervals
are brief.
31
Advertising