Channel selector setting – Nikon ML-3 Modulite Remote Control Set User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Distance range
Channel selector setting
Set each corresponding
transmitter/receiver pair to the
same channel. Up to two IVIL-3
sets can be used in the same area
without interference.
> If the transmitter is not pointed directly at the
receiver (if the angle is askew), the range changes
as follows:
0° — approx. 8m (26.2 ft.)
0-10° — approx. 6m (19.7 ft.)
17
Advertising