Continuous frame shooting (c) – Nikon ML-3 Modulite Remote Control Set User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Continuous frame shooting (C)
Set the transmitter’s
1
shooting mode seiector to C.
• if the camera’s focus mode
is set to S, the camera may
not focus correctiy when
the transmission button is
pressed lightly.
Be sure to set the camera’s
focus mode to C.
• Depending on the shooting
situation, set the camera's
focus mode to M. In this
case, be sure to adjust
focus
manually
before
shooting.
Point the transmitter in the direction of the reception sensor and
■ lightly press the transmission button. The monitor light on the
transmitter will light up for a moment. Then, the reception indicator
LED also lights up for a moment and the camera’s exposure meter
turns on. In the autofocus mode, focus detection starts
immediately.
If a connected Speedlight is set at STBY (standby), it also turns on.
21